How much do you know about power adapter certification?

March 23, 2023

The power adapter types include household appliance power adapter, IT power adapter, AV power adapter.

Power adapter certification: SAA certification, CQC certification, CE certification, CB certification, PSE certification, FCC certification,CSA certification, TUVcertification, CCC certification......

1.SAA certification

SAA certification for the Standards Association of Australian certification, so many friends known as Australia certification, electrical products into the Australian market must comply with SAA certification. There are two main types of SAA marks, one is formal recognition and the other is standard marks. Proforma certification is only the responsibility of the sample, while the standard mark is subject to each factory review. SAA certification scope is mainly divided into quality management system; Environmental management system; Occupational health and safety management; Information security management; It takes 3-4 weeks for common products to apply for Australian SAA certification. If the product quality is not up to standard, the date may be extended. If the product shipped is not certified, the product will be detained or confiscated or fined.

2. CQC certification

China Quality Certification Center (CQC), can obtain the CQC certification, and then affixed with the CQC certification mark of the product, is the national certification body certification, certification purposes for safety, in line with the national response to the quality standards.

3. CE certification

More and more products are using CE certification. If there is CE mark in a product, it represents the requirements expressed in a series of European directives on product safety, health, environmental protection and consumer protection. If the product can meet the relevant requirements, it can stick CE mark, but not meet the relevant requirements, it is the opposite. (I think CE is not certification, just self-declaration, general shipment Europe will make this declaration)

4. CB Certification

CB system (electrical products qualified testing and certification IEC system) is IECEE operation - an international system, IECEE member certification bodies based on IEC standards for electrical products safety performance testing, the test results that is the CB test report and CB test certificate in IECEE member states to obtain mutual recognition of the system. The aim is to reduce international trade barriers arising from having to meet certification or approval guidelines in different countries. IECEE is the International Electrotechnical Commission electrical products conformity testing and certification organization for short.

6. PSE certification

Japan's DENTORL Law stipulates that 498 products must pass safety certification to enter the Japanese market. Among them, 165 Class A products should obtain the diamond-shaped PSE mark, and 333 Class B products should obtain the circular PSE mark.

7. FCC certification

FCC Certification Introduction The Federal Communications Commission (FCC) was established in 1934 by the Communications Act as an independent agency of the United States government, reporting directly to Congress. Many radio application products, communications products and digital products require FCC approval to enter the U.S. market. FCC, the Federal Communications Commission of the United States, the FCC has developed some related to the electromagnetic compatibility of electronic equipment and operator personal safety and a series of product quality and performance standards, the FCC has developed these standards have been used by many people, but also has been a lot of the world's national technical regulatory authorities or similar agencies certification. Because of this, many electronic products, whether it is the technical manual on the factory, have a certificate issued by the FCC of compliance with a standard or a declaration of compliance with an FCC standard.

8. CSA certification

Canadian Standards Association is abbreviated as CSA, which means Canadian Standards Association. It was established in 1919, the North American market such as electronic appliances to obtain CSA certification. The larger certification body in Canada is CSA, which is also one of the more famous safety certification bodies in the world. Machinery, building materials, electrical appliances, all equipment on the computer, office equipment, environmental protection, medical fire safety, sports, entertainment and other aspects of all types, it can be tested and given to provide product safety certification.

9. TUV certification

TUVR-Heinland Technology Supervision Company, which is a large certification body for product safety and quality in Germany, is a government recognized testing institution. TUV and FCC certification, CE certification, CSA certification and UL certification are the same level, are belong to the authority. If you want to enter the German market, you must pass the TUV certification. So you can see TUV certification and the above 5 logos on all kinds of IT products and household appliances.

10, CCC product certification

The so-called 3C Certification, this certification was born on May 1, 2002, CCC is the abbreviation of the English book China Compulsory Certification, meaning "China Compulsory Certification". If a product is listed in the First Batch of Products subject to mandatory Product Certification issued by the General Administration of Quality Supervision, Inspection and Quarantine and the Certification and Accreditation Administration, the product will be subject to mandatory testing and audit. If it is included in the catalog of products, did not obtain the designated body certification, did not carry out according to the provisions of the label certification, it can not be sold, imported and factory. When implemented, the logo replaces the original "Great Wall" logo, which has been invalidated since May 1, 2003. It should be noted that the 3C mark is not a quality mark, but a basic safety certification.